Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 661

Table 24-6. show hosts Command Example Fields (continued) Field Flags TTL Type Address Description Classifies the entry as one of the following: • perm - the entry was manually configured and will not time out • temp - the entry was learned and will time out after 72 hours of inactivity. Also included in the flag is an indication of the validity of the route: • ok - the entry is valid. • ex - the entry expired. • ?? - the entry is suspect. Displays the amount of time until the entry ages out of the cache. For dynamically learnt entries only. Displays IP as the type of entry. Displays the IP address(es) assigned to the host. Related Commands traceroute ip host View DNS resolution Configure a host. show ip cam linecard c e View CAM entries for a port pipe on a line card. Syntax show ip cam linecard number port-set pipe-number [ip-address mask [longer-prefixes] | index index-number | summary | vrf vrf instance] Parameters number pipe-number ip-address mask [longer-prefix] index index-number summary vrf instance Enter the number of the line card. Range: 0 to 13 on a E1200/1200i, 0 to 6 on a E600600i, and 0 to 5 on a E300. Enter the number of the line card's port-pipe. Range: 0 to 1 (OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword longer-prefixes to view routes with a common prefix. (OPTIONAL) Enter the keyword index followed by the CAM index number. Range: depends on CAM size (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number of routes that can be entered into the CAM. (OPTIONAL) E-Series Only: Enter the keyword vrf following by the VRF Instance name to show CAM information as it applies to that VRF instance. Command Modes EXEC EXEC Privilege Command History Version 8.1.1.2 Version 8.1.1.0 Version 7.9.1.0 E-Series ExaScale E600i supported Introduced on E-Series ExaScale Introduced VRF on the E-Series IPv4 Routing | 661