Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1052

www.dell.com | support.dell.com Table 38-9. Command Example Descriptions: show ip ospf process-id database summary Items LS Age Options LS Type Link State ID Advertising Router LS Seq Number Checksum Length Network Mask TOS Metric Description Displays the LSA age. Displays the optional capabilities available on router. The following options can be found in this item: • TOS-capability or No TOS-capability is displayed depending on whether the router can support Type of Service. • DC or No DC is displayed depending on whether the originating router can support OSPF over demand circuits. • E or No E is displayed on whether the originating router can accept AS External LSAs. Displays the LSA's type. Displays the Link State ID. Identifies the router ID of the LSA's originating router. Identifies the link state sequence number. This number enables you to identify old or duplicate LSAs. Displays the Fletcher checksum of an LSA's complete contents. Displays the length in bytes of the LSA. Displays the network mask implemented on the area. Displays the TOS options. Option 0 is the only option. Displays the LSA metrics. Related Commands show ip ospf database Displays OSPF database information. show ip ospf interface c e s Display the OSPF interfaces configured. If OSPF is not enabled on the switch, no output is generated. Syntax show ip ospf process-id interface [interface] 1052 | Open Shortest Path First (OSPFv2 and OSPFv3)