Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1369

access-list-name ipv6 access-list-name access-list-name ipv6 access-list-name (Optional) Enter the standard IPv4 access list name (a string up to 16 characters long). (Optional) Enter the keyword ipv6 followed by the IPv6 access list name (a string up to 16 characters long) (Optional) Enter both an IPv4 and IPv6 access list name. Defaults As above Command Modes CONFIGURATION Command History Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series E-Series legacy command Usage Information Examples Note: For IPv6 ACLs, only IPv6 and UDP types are valid for SNMP; TCP, ICMP rules are not valid for SNMP. In IPv6 ACLs port rules are not valid for SNMP. No default values exist for authentication or privacy algorithms and no default password exist. If you forget a password, you cannot recover it; the user must be reconfigured. You can specify either a plain-text password or an encrypted cypher-text password. In either case, the password will be stored in the configuration in an encrypted form and displayed as encrypted in the show running-config command. If you have an encrypted password, you can specify the encrypted string instead of the plain-text password. The following command is an example of how to specify the command with an encrypted string: Figure 54-9. snmp-server user Command Example FTOS# snmp-server user privuser v3group v3 encrypted auth md5 9fc53d9d908118b2804fe80e3ba8763d priv des56 d0452401a8c3ce42804fe80e3ba8763d The following command is an example of how to enter a plain-text password as the string authpasswd for user authuser of group v3group. FTOS#conf FTOS(conf)# snmp-server user authuser v3group v3 auth md5 authpasswd The following command configures a remote user named n3user with a v3 security model and a security level of authNOPriv. FTOS#conf FTOS(conf)# snmp-server user n3user ngroup remote 172.31.1.3 udp-port 5009 3 auth md5 authpasswd Related Commands Note: The number of configurable users is limited to 16. show snmp user Display the information configured on each SNMP user name. SNMP and Syslog | 1369