Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 662

www.dell.com | support.dell.com Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on C-Series Introduced for E-Series Example Figure 24-10. show ip cam Command Example on E-Series FTOS#show ip cam linecard 13 port-set 0 Index Destination EC CG V C Next-Hop VId Mac-Addr Port 3276 6.6.6.2 0 0 1 1 0.0.0.0 0 00:00:00:00:00:00 17c1 CP 3277 5.5.5.2 0 0 1 1 0.0.0.0 0 00:00:00:00:00:00 17c1 CP 3278 4.4.4.2 0 0 1 1 0.0.0.0 0 00:00:00:00:00:00 17c1 CP 3279 3.3.3.2 0 0 1 1 0.0.0.0 0 00:00:00:00:00:00 17c1 CP 3280 2.2.2.2 0 0 1 1 0.0.0.0 0 00:00:00:00:00:00 17c1 CP 11144 6.6.6.0 0 0 1 1 0.0.0.0 6 00:00:00:00:00:00 17c5 RP2 11145 5.5.5.0 0 0 1 1 0.0.0.0 5 00:00:00:00:00:00 17c5 RP2 11146 4.4.4.0 0 0 1 1 0.0.0.0 4 00:00:00:00:00:00 17c5 RP2 11147 3.3.3.0 0 0 1 1 0.0.0.0 3 00:00:00:00:00:00 17c5 RP2 11148 2.2.2.0 0 0 1 1 0.0.0.0 2 00:00:00:00:00:00 17c5 RP2 65535 0.0.0.0 0 0 1 1 0.0.0.0 0 00:00:00:00:00:00 17c5 RP2 FTOS# Table 24-7. show ip cam Command Example Fields Field Index Destination EC CG V C Next-Hop VId Mac Addr Port Description Displays the CAM index number of the entry. Displays the destination route of the index. Displays the number of equal cost multipaths (ECMP) available for the default route for non-Jumbo line cards. Displays 0,1 when ECMP is more than 8, for Jumbo line cards. Displays 0. Displays a 1 if the entry is valid and a 0 if the entry is for a line card with Catalog number beginning with LC-EF. Displays the CPU bit. 1 indicates that a packet hitting this entry is forwarded to the CP or RP2, depending on Egress port. Displays the next hop IP address of the entry. Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN. Displays the next-hop router's MAC address. Displays the egress interface. Use the second half of the entry to determine the interface. For example, in the entry 17cl CP, the CP is the pertinent portion. CP = control processor RP2 = route processor 2 Gi = Gigabit Ethernet interface So = SONET interface Te = 10 Gigabit Ethernet interface 662 | IPv4 Routing