Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 947
show spanning-tree msti
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 947 highlights
show spanning-tree msti c e s View the Multiple Spanning Tree instance. Syntax show spanning-tree msti [instance-number [brief]] [guard] Parameters instance-number brief guard [Optional] Enter the Multiple Spanning Tree Instance number Range: 0 to 63 [Optional] Enter the keyword brief to view a synopsis of the MST instance. [Optional] Enter the keyword guard to display the type of guard enabled on an MSTP interface and the current port state. Command Modes EXEC EXEC Privilege Usage You must enable Multiple Spanning Tree Protocol prior to using this command. Information Command History Version 8.5.1.0 Version 8.4.2.1 Version 7.6.1.0 Version 7.5.1.0 Version 6.4.1.0 Support for the optional guard keyword was added on the E-Series ExaScale. Support for the optional guard keyword was added on the C-Series, S-Series, and E-Series TeraScale. Added support for S-Series Added support for C-Series Expanded to display port error disable state (EDS) caused by loopback BPDU inconsistency (see Figure 34-6) Example Figure 34-5. show spanning-tree msti [instance-number] Command Example FTOS#show spanning-tree msti 10 MSTI 10 VLANs mapped 101-105 Bridge Identifier has priority 32768, Address 0001.e802.3506 Configured hello time 2, max age 20, forward delay 15, max hops 5 Current root has priority 16384, Address 0001.e800.0a5c Number of topology changes 0, last change occured 3058087 Port 82 (GigabitEthernet 2/0) is designated Forwarding Port path cost 0, Port priority 128, Port Identifier 128.82 Designated root has priority 16384, address 0001.e800.0a:5c Designated bridge has priority 32768, address 0001.e802.35:06 Designated port id is 128.82, designated path cost Number of transitions to forwarding state 1 BPDU (Mrecords): sent 1109, received 0 The port is not in the portfast mode Port 88 (GigabitEthernet 2/6) is root Forwarding Port path cost 0, Port priority 128, Port Identifier 128.88 Designated root has priority 16384, address 0001.e800.0a:5c Designated bridge has priority 16384, address 0001.e800.0a:5c Designated port id is 128.88, designated path cost Number of transitions to forwarding state 4 BPDU (Mrecords): sent 19, received 1103 The port is not in the portfast mode Port 89 (GigabitEthernet 2/7) is alternate Discarding Port path cost 0, Port priority 128, Port Identifier 128.89 Designated root has priority 16384, address 0001.e800.0a:5c Designated bridge has priority 16384, address 0001.e800.0a:5c Designated port id is 128.89, designated path cost Number of transitions to forwarding state 3 BPDU (Mrecords): sent 7, received 1103 The port is not in the portfast mode Multiple Spanning Tree Protocol (MSTP) | 947