Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 842

www.dell.com | support.dell.com log-adjacency-changes e Generate a log messages for adjacency state changes. Syntax log-adjacency-changes To disable this function, enter no log-adjacency-changes. Defaults Adjacency changes are not logged. Command Modes ROUTER ISIS Usage This command enables you to monitor adjacency state changes, which is useful when you monitor Information large networks. Messages are logged in the system error message facility. lsp-gen-interval e Set the minimum interval between successive generations of link-state packets (LSPs). Syntax lsp-gen-interval [level-l | level-2] interval seconds [initial_wait_interval seconds [second_wait_interval seconds]] To restore default values, use the no lsp-gen-interval [level-l | level-2] interval seconds [initial_wait_interval seconds [second_wait_interval seconds]] command. Parameters level-l level-2 interval seconds initial_wait_interval seconds second_wait_interval seconds (OPTIONAL) Enter the keyword level-1 to apply the configuration to generation of Level-1 LSPs. (OPTIONAL) Enter the keyword level-2 to apply the configuration to generation of Level-2 LSPs. Enter the maximum number of seconds between LSP generations. Range: 0 to 120 seconds Default: 5 seconds (OPTIONAL) Enter the initial wait time, in seconds, before running the first LSP generation. Range: 0 to 120 seconds Default: 1 second (OPTIONAL) Enter the wait interval, in seconds, between the first and second LSP generation. Range: 0 to 120 seconds Default: 5 seconds Defaults Defaults as above Command Modes ROUTER ISIS Command History Version 7.5.1.0 Expanded to support LSP Throttling Enhancement 842 | Intermediate System to Intermediate System (IS-IS)