Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 58

www.dell.com | support.dell.com system-fpga link-fpga booted file-url (OPTIONAL) Enter system-fpga to upgrade only the system FPGA on a fiber linecard. Contact the Dell Force10 TAC before using this keyword. (OPTIONAL) Enter link-fpga to upgrade only the link FPGA on a fiber linecard. Contact the Dell Force10 TAC before using this keyword. Upgrade the FPGA image using the currently running FTOS image. Enter the following location keywords and information to upgrade the FPGA using an FTOS image other than the one currently running: • To specify an FTOS image on the internal flash, enter flash:// file-path/filename. • To specify an FTOS image on an FTP server, enter ftp:// user:password@hostip/filepath • To specify an FTOS image on the external flash on the primary RPM, slot0://file-path/filename • To copy a file on a TFTP server, enter tftp://hostip/filepath/ filename Defaults None. Command Mode EXEC Privilege Command History Version 7.7.1.0 Version 7.6.1.0 Version 7.5.1.0 Renamed the primary-fpga-flash keyword to fpga-image. Added support for upgrading using a remote FTOS image. Added support for the all keyword Introduced on C-Series Example Command example: upgrade fpga-image FTOS#conf Force10(conf)# upgrade primary-fpga-flash rpm Proceed to upgrade primary fpga flash for rpm 0 [confirm yes/no]: yes FTOS# Usage Reset the card using the power-cycle option after restoring the FPGA command. Information Related Commands reset restore fpga-image Reset a line card or RPM. This command copies the backup FPGA image to the primary FPGA image. 58 | File Management