Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1287
access-class, enable password
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1287 highlights
access-class c e s Restrict incoming connections to a particular IP address in a defined IP access control list (ACL). Syntax access-class access-list-name To delete a setting, use the no access-class command. Parameters access-list-name Enter the name of an established IP Standard ACL. Defaults Not configured. Command Modes LINE Command History Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced for S-Series Introduced for C-Series Introduced on E-Series Related Commands line ip access-list standard ip access-list extended Apply an authentication method list to designated terminal lines. Name (or select) a standard access list to filter based on IP address. Name (or select) an extended access list based on IP addresses or protocols. enable password c e s Change the password for the enable command. Syntax enable password [level level] [encryption-type] password To delete a password, use the no enable password [encryption-type] password [level level] command. Parameters level level encryption-type password (OPTIONAL) Enter the keyword level followed by a number as the level of access. Range: 1 to 15 (OPTIONAL) Enter the number 7 or 0 as the encryption type. Enter a 7 followed by a text string as the hidden password. The text string must be a password that was already encrypted by a Dell Force10 router. Use this parameter only with a password that you copied from the show running-config file of another Dell Force10 router. Enter a text string, up to 32 characters long, as the clear text password. Defaults No password is configured. level = 15 Command Modes CONFIGURATION Command History Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced for S-Series Introduced for C-Series Introduced for E-Series Security | 1287