Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1374

www.dell.com | support.dell.com logging buffered c e s Enable logging and specify which messages are logged to an internal buffer. By default, all messages are logged to the internal buffer. Syntax logging buffered [level] [size] To return to the default values, enter default logging buffered. To disable logging stored to an internal buffer, enter no logging buffered. Parameters level size (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. Default: 7 or debugging. (OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of messages buffered depends on the size of each message. Range: 40960 to 524288. Default: 40960 bytes. Defaults level = 7; size = 40960 bytes Command Modes CONFIGURATION Command History Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series E-Series legacy command Usage When you decrease the buffer size, all messages stored in the buffer are lost. Increasing the buffer size Information does not affect messages stored in the buffer. Related Commands clear logging default logging buffered show logging Clear the logging buffer. Returns the logging buffered parameters to the default setting. Display the logging setting and system messages in the internal buffer. logging console c e s Specify which messages are logged to the console. Syntax logging console [level] To return to the default values, enter default logging console. To disable logging to the console, enter no logging console. Parameters level (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following parameters: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. Default: 7 or debugging. Defaults 7 or debugging Command Modes CONFIGURATION 1374 | SNMP and Syslog