Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1431

Defaults Not configured. Command Modes EXEC Privilege Command History Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Support added for S-Series Support added for C-Series Introduced for E-Series Usage Information In the switch, the hardware clock is separate from the software and is called the calendar. This hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS automatically updates the software clock after system bootup. You cannot delete this command (that is, there is not a "no" version of this command). clock set c e s Set the software clock in the switch. Syntax clock set time month day year Parameters time month day year Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format, example, 17:15:00 is 5:15 pm. Enter the name of one of the 12 months, in English. You can enter the number of a day and change the order of the display to time day month year. Enter the number of the day. Range: 1 to 31. You can enter the name of a month to change the order of the display to time month day year. Enter a four-digit number as the year. Range: 1993 to 2035. Defaults Not configured Command Modes EXEC Privilege Command History Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Support added for S-Series Support added for C-Series Introduced for E-Series Example Figure 59-2. clock set Command Example FTOS#clock set 16:20:00 19 may 2001 FTOS# Usage You can change the order of the month and day parameters to enter the time and date as time day Information month year. You cannot delete the software clock. Time and Network Time Protocol (NTP) | 1431