Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 929

Command History Version 6.2.1.1 Introduced ip msdp cache-rejected-sa e Enable a MSDP cache for the rejected source-active entries. Syntax ip msdp cache-rejected-sa {number} To clear the MSDP rejected source-active entries, use the no ip msdp cache-rejected-sa {number} command followed by the ip msdp cache-rejected-sa {number} command. Parameters number Enter the number of rejected SA entries to cache. Range: 0 to 32766 Defaults No default values or behavior Command Modes CONFIGURATION Command History Version 7.4.1.0 Introduced Related Commands show ip msdp sa-cache rejected-sa Description. ip msdp default-peer e Define a default peer from which to accept all Source-Active (SA) messages. Syntax ip msdp default-peer peer address [list name] To remove the default peer, use the no ip msdp default-peer {peer address} list name command. Parameters peer address list name Enter the peer address in a dotted decimal format (A.B.C.D.) Enter this keyword and specify a standard access list that contains the RP address that should be treated as the default peer. If no access list is specified, then all SAs from the peer are accepted. Defaults Not configured Command Modes CONFIGURATION Command History Version 7.8.1.0 Version 6.2.1.1 Added the list option, and removed the prefix-list option. Introduced Usage If a list is not specified, all SA messages received from the default peer are accepted. You can enter Information multiple default peer commands. Multicast Source Discovery Protocol (MSDP) | 929