Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 665

Parameters vrf instance slot-number ip-address mask longer-prefixes summary (OPTIONAL) E-Series Only: Enter the keyword vrf followed by the VRF INstance name to show the FIB cache entries tied to that VRF instance. Enter the number of the line card slot. C-Series Range: 0-7 E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, 0 to 5 on a E300 (OPTIONAL) Enter the IP address of the network destination to view only information on that destination. You must enter the IP address is dotted decimal format (A.B.C.D). You must enter the mask in slash prefix format (/X). (OPTIONAL) Enter the keyword longer-prefixes to view all routes with a common prefix. (OPTIONAL) Enter the keyword summary to view the total number of prefixes in the FIB. Command Mode Command History EXEC EXEC Privilege Version 8.1.1.0 Version 7.9.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on E-Series ExaScale Introduced VRF on the E-Series Introduced on C-Series Introduced for E-Series Example Figure 24-13. show ip fib linecard Command Example FTOS>show ip fib linecard 12 Destination Gateway First-Hop 3.0.0.0/8 via 100.10.10.10, So 2/8 100.10.10.10 3.0.0.0/8 via 101.10.10.10, So 2/9 100.10.10.0/24 Direct, So 2/8 0.0.0.0 100.10.10.1/32 via 127.0.0.1 127.0.0.1 100.10.10.10/32 via 100.10.10.10, So 2/8 100.10.10.10 101.10.10.0/24 Direct, So 2/9 0.0.0.0 101.10.10.1/32 via 127.0.0.1 127.0.0.1 101.10.10.10/32 via 101.10.10.10, So 2/9 101.10.10.10 FTOS> Mac-Addr Port VId Index EC 00:01:e8:00:03:ff So 2/8 0 60260 0 00:01:e8:00:03:ff So 2/8 0 11144 0 00:00:00:00:00:00 CP 0 3276 0 00:01:e8:00:03:ff So 2/8 0 0 0 00:00:00:00:00:00 RP2 0 11145 0 00:00:00:00:00:00 CP 0 3277 0 00:01:e8:01:62:32 So 2/9 0 1 0 Table 24-10. show ip fib linecard Command Example Fields Field Destination Gateway First-Hop Mac-Addr Port VId Index EC Description Lists the destination IP address. Displays either the word direct and an interface for a directly connected route or the remote IP address to be used to forward the traffic. Displays the first hop IP address. Displays the MAC address. Displays the egress-port information. Displays the VLAN ID. If no VLAN is assigned, zero (0) is listed. Displays the internal interface number. Displays the number of ECMP paths. IPv4 Routing | 665