Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 707

Version 7.8.1.0 Version 7.4.1.0 Introduced on the C-Series Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Introduced on the E-Series TeraScale Example Figure 25-6. Command Example: show ipv6 accounting access-lists FTOS#show ipv6 accounting access-list ! Ingress IPv6 access list AclList1 on GigabitEthernet 9/0 Total cam count 15 seq 10 permit icmp host 3333:: any mobile-advertisement log seq 15 deny tcp any any rst seq 20 permit udp any any gt 101 count (0 packets) ! FTOS# Table 25-2. show ip accounting access-lists Command Example Field Field "Ingress IPv6..." "seq 10..." Description Displays the name of the IPv6 ACL, in this example "AclList1". Displays the filter. If the keywords count or byte were configured in the filter, the number of packets or bytes processed by the filter is displayed at the end of the line. show running-config acl c e s Display the ACL running configuration. Syntax show running-config acl Command Modes EXEC EXEC Privilege Command History Version 8.4.2.1 Version 8.2.1.0 Version 7.8.1.0 Version 7.4.1.0 Introduced on the S-Series Introduced on the E-Series ExaScale Introduced on the C-Series Introduced support on the E-Series TeraScale Example Figure 25-7. Command Example: show running-config acl FTOS#show running-config acl ! ip access-list extended ext-acl1 ! ip access-list standard std-acl1 ! ipv6 access-list Acl1 description IPV6 Access-list seq 5 permit ipv6 1111::2222/127 host 3333::1111 log count bytes remark 10 Remark for Entry # 10 seq 10 permit icmp host 3333:: any mobile-advertisement log seq 15 deny tcp any any rst seq 20 permit udp any any gt 100 count !FTOS# IPv6 Access Control Lists (IPv6 ACLs) | 707