Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 887

Virtual LAN (VLAN) Commands The following commands configure and monitor Virtual LANs (VLANs). VLANs are a virtual interface and use many of the same commands as physical interfaces. You can configure an IP address and Layer 3 protocols on a VLAN called Inter-VLAN routing. FTP, TFTP, ACLs and SNMP are not supported on a VLAN. Occasionally, while sending broadcast traffic over multiple Layer 3 VLANs, the VRRP state of a VLAN interface may continually switch between Master and Backup. • description • default vlan-id • default-vlan disable • enable vlan-counters • name • show config • show vlan • tagged • track ip • untagged See also VLAN Stacking and see VLAN-related commands, such as portmode hybrid, in Chapter 23, Interfaces. description c e s Add a description about the selected VLAN. Syntax description description To remove the description from the VLAN, use the no description command. Parameters description Enter a text string description to identify the VLAN (80 characters maximum). Defaults No default behavior or values Command Modes INTERFACE VLAN Command History Version 7.6.1.0 Version 6.3.1.0 Introduced on C-Series and S-Series Introduced on E-Series Related Commands show vlan Display VLAN configuration. Layer 2 | 887