Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 601
show interfaces linecard
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 601 highlights
show interfaces linecard c e Display information on all interfaces on a specific line card. Syntax show interfaces linecard slot-number Parameters slot-number Enter a number for the line card slot. C-Series Range: 0-7 for C300; 0-3 for C150 E-Series Range: 0 to 13 on the E1200/1200i, 0 to 6 on the E600/600i, 0 to 5 on the E300 Command Modes EXEC EXEC Privilege Command History Version 8.1.1.2 Version 8.1.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Introduced support on E-Series ExaScale E600i Introduced on E-Series ExaScale Introduced on C-Series Introduced on E-Series Usage The following figure shows a line card that has an XFP interface. The type, medium, wavelength, and receive power details are displayed. When a device that is not certified by Dell Force10 is inserted, it might work, but its details might not be readable by FTOS and not displayed here. Example Figure 23-35. show interfaces linecard Command Example (in C150) FTOS#show interfaces linecard 0 TenGigabitEthernet 0/0 is down, line protocol is down Hardware is Force10Eth, address is 00:01:e8:51:b2:d4 Current address is 00:01:e8:51:b2:d4 Pluggable media present, XFP type is 10GBASE-SR Medium is MultiRate, Wavelength is 850.00nm XFP receive power reading is -2.3538 Interface index is 33883138 Internet address is not set MTU 1554 bytes, IP MTU 1500 bytes LineSpeed 10000 Mbit ARP type: ARPA, ARP Timeout 04:00:00 Last clearing of "show interface" counters 20:16:29 Queueing strategy: fifo Input Statistics: 0 packets, 0 bytes 0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts 0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts 0 Multicasts, 0 Broadcasts 0 runts, 0 giants, 0 throttles 0 CRC, 0 overrun, 0 discarded Output Statistics: 0 packets, 0 bytes, 0 underruns 0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts --More-- Related Commands show interfaces Display information on a specific physical interface or virtual interface. Interfaces | 601