Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1152
source remote vlan remote port mirroring, source remote vlan, destination, range,
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1152 highlights
www.dell.com | support.dell.com source remote vlan (remote port mirroring) e x Associate the reserved L2 VLAN used to transport mirrored traffic in remote port mirroring with a destination session and configure the destination ports to which an analyzer is connected. Syntax source remote vlan vlan-id destination {single-interface | range {interface-list | interface-range | mixed-interface-list}} Parameters vlan-id single-interface range interface-list range interface-range range mixed-interface-list VLAN ID of the reserved L2 VLAN used for remote port mirroring. Valid VLAN IDs are 1 to 4094. The default VLAN ID is not supported. Specifies one of the following interface types: • 1-Gigabit Ethernet: Enter gigabitethernet slot/port. • 10-Gigabit Ethernet: Enter tengigabitethernet slot/port. Specifies multiple interfaces separated by a comma and space: single-interface, single-interface, single-interface... For example: source remote-vlan 4 destination range gig 1/2, tengig 3/4 Specifies one of the following interface ranges: • gigabitethernet slot/first_port - last_port • tengigabitethernet slot/first_port - last_port A space is required before and after the dash (-). For example: source remote-vlan 4 destination range gig 1/2 - 4 Specifies single interfaces and interface ranges in any order: single-interface, interface-range, single-interface... For example: source remote-vlan 4 destination range gig 3/4 - 5, tengig 1/0 Defaults No default behavior or values Command Modes MONITOR SESSION (conf-mon-sess-session-ID) Command History Example Version 8.4.1.2 Introduced on the E-Series ExaScale. Figure 44-6. Command Example: Associating the Reserved VLAN with a Destination Session FTOS(conf-mon-sess-11)#source remote vlan 10 destination gigabitethernet 10/0 - 2 FTOS(conf-mon-sess-11)# 1152 | Port Monitoring