Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 343
neighbor advertisement-start, neighbor allowas-in
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 343 highlights
Command History Version 7.8.1.0 Version 7.7.1.0 Introduced support on S-Series Introduced support on C-Series neighbor advertisement-start c e s Set the minimum interval before starting to send BGP routing updates. Syntax neighbor {ip-address} advertisement-start seconds To return to the default value, use the no neighbor {ip-address} advertisement-start command. Parameters ip-address seconds Enter the IP address of the neighbor in dotted decimal format. Enter a number as the time interval, in seconds, before BGP route updates are sent. Range: 0 to 3600 seconds. Defaults none Command Modes ROUTER BGP Command History Version 7.8.1.0 Version 7.7.1.0 Introduced support on S-Series Introduced support on C-Series neighbor allowas-in c e s Set the number of times an AS number can occur in the AS path Syntax neighbor {ip-address | peer-group-name} allowas-in number To return to the default value, use the no neighbor {ip-address | peer-group-name} allowas-in command. Parameters ip-address peer-group-name number Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to set the advertisement interval for all routers in the peer group. Enter a number of times to allow this neighbor ID to use the AS path. Range: 1 to 10. Defaults Not configured. Command Modes ROUTER BGP Related Commands bgp four-octet-as-support Enable 4-Byte support for the BGP process. Command History Version 7.8.1.0 Version 7.7.1.0 Introduced support on S-Series Introduced on C-Series and E-Series Border Gateway Protocol IPv4 (BGPv4) | 343