Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 348
neighbor local-as, neighbor maximum-prefix
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 348 highlights
www.dell.com | support.dell.com Usage Information Command History This feature is advertised to BGP neighbors through a capability advertisement. In receiver only mode, BGP saves the advertised routes of peers that support this capability when they restart. Version 7.8.1.0 Version 7.7.1.0 Introduced support on S-Series Introduced support on C-Series neighbor local-as c e s Configure Internal BGP (IBGP) routers to accept external routes from neighbors with a local AS number in the AS number path Syntax neighbor {ip-address | peer-group-name} local-as as-number [no-prepend] To return to the default value, use the no neighbor {ip-address | peer-group-name} local-as command. Parameters ip-address peer-group-name as-number no prepend Enter the IP address of the neighbor in dotted decimal format. Enter the name of the peer group to set the advertisement interval for all routers in the peer group. Enter the AS number to reset all neighbors belonging to that AS. Range: 0-65535 (2-Byte) or 1-4294967295 (4-Byte) or 0.1-65535.65535 (Dotted format) Specifies that local AS values are not prepended to announcements from the neighbor. Defaults Not configured. Command Modes ROUTER BGP Related Commands bgp four-octet-as-support Enable 4-Byte support for the BGP process. Command History Version 7.8.1.0 Version 7.7.1.0 Introduced support on S-Series Introduced command Introduced support on C-Series neighbor maximum-prefix c e s Control the number of network prefixes received. Syntax neighbor {ip-address | peer-group-name} maximum-prefix maximum [threshold] [warning-only] To return to the default values, use the no neighbor {ip-address | peer-group-name} maximum-prefix maximum command. 348 | Border Gateway Protocol IPv4 (BGPv4)