Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1430

www.dell.com | support.dell.com calendar set c e s Set the time and date for the switch hardware clock. Syntax calendar set time month day year Parameters time month day year Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour format, for example, 17:15:00 is 5:15 pm. Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. Enter the number of the day. Range: 1 to 31. You can enter the name of a month to change the order of the display to time day month year. Enter a four-digit number as the year. Range: 1993 to 2035. Command Modes EXEC Privilege Command History Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Support added for S-Series Support added for C-Series Introduced for E-Series Example Figure 59-1. calendar set Command Example FTOS#calendar set 08:55:00 june 18 2006 FTOS# Usage You can change the order of the month and day parameters to enter the time and date as time day Information month year. In the switch, the hardware clock is separate from the software and is called the calendar. This hardware clock runs continuously. After the hardware clock (the calendar) is set, the FTOS automatically updates the software clock after system bootup.You cannot delete the hardware clock (calendar). To manually update the software with the hardware clock, use the command clock read-calendar. Related Commands clock read-calendar clock set clock update-calendar show clock Set the software clock based on the hardware clock. Set the software clock. Set the hardware clock based on the software clock. Display clock settings. clock read-calendar c e s Set the software clock on the switch from the information set in hardware clock (calendar). Syntax clock read-calendar 1430 | Time and Network Time Protocol (NTP)