Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1206

www.dell.com | support.dell.com Usage A single policy-map can be attached to one or more interfaces to specify the service-policy for those Information interfaces. A policy map attached to an interface can be modified. Related Commands Note: The service-policy commands are not allowed on a port channel. The service-policy input policy-map-name command and the service-class dynamic dot1p command are not allowed simultaneously on an interface. However, the service-policy input command (without the policy-map-name option) and the service-class dynamic dot1p command are allowed on an interface. policy-map-input Create an input policy map. service-policy output c e s Apply an output policy map to the selected interface. Syntax service-policy output policy-map-name To remove the output policy map from the interface, use the no service-policy output policy-map-name command. Parameters policy-map-name Enter the name for the policy map in character format (16 characters maximum). You can identify an existing policy map or name one that does not yet exist. Defaults No default behavior or values Command Modes INTERFACE Command History Version 7.6.1.0 Introduced on C-Series and S-Series pre-Version 6.1.1.1 Introduced on E-Series Usage A single policy-map can be attached to one or more interfaces to specify the service-policy for those Information interfaces. A policy map attached to an interface can be modified. Related Commands policy-map-output Create an output policy map. service-queue c e s Assign a class map and QoS policy to different queues. Syntax service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name] To remove the queue assignment, use the no service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-name] command. 1206 | Quality of Service (QoS)