Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1503

Data Path Debugging Commands Data path refers to external data and control packets that are sent to an RPM or line card, or processed by FP and forwarded through the system. • show hardware drops • show hardware cpu data-plane show hardware drops c View internal packet-drop counters on a line card or RPM. Syntax show hardware {linecard number | rpm number} drops [unit number] [port number] Parameters linecard rpm unit port number Enter the keyword linecard to view information about a line card. Enter the keyword rpm to view information about an RPM. (OPTIONAL) Enter the keyword unit to view information about a unit. Range: 0-3 (OPTIONAL) Enter the keyword port to view information about a port. Range: 1-8 Enter a number after the following keywords: • After the keyword linecard: Range: 0-7 for the C300 • After the keyword rpm: Range: 0-1 • After the keyword unit, enter the number of CSF or FP ASIC. • After the keyword port, enter the port number. Defaults None. Command Mode EXEC EXEC Privilege Command History Version 7.5.1.0 Introduction C-Series Diagnostics and Debugging | 1503