Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1546
show console
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1546 highlights
www.dell.com | support.dell.com • [by admin from vty0 (peer RPM)] -with brackets, when the command is executed to primary rpm via standby rpm using telnet-peer-rpm command. Each command contains up to 50 characters in the display output. FTOS compares the first 50 characters of each command and if the characters are the same (i.e. the same command was issued), then the display output indicates the duplicate entry with "Repeated X times" (see Figure 65-5). All commands executed by all users, except password related commands, are captured in the trace command history log. Each command has a date and time stamp (see Figure 65-5). The trace-log file has a separate 3000 line buffer to hold command history on a FIFO basis. When the buffer is full, the contents wraps (i.e. the first line is automatically deleted to make room for the last command line).This file can be analyzed by the Dell Force10 Technical Assistance Center (TAC) to assist in troubleshooting. Note: No password information is saved to the trace command history log. show console e Display, onto the console, background resets, calls, initialization etc. of the designated line card. Syntax show console lp slot-number Parameters lp slot-number (OPTIONAL) Enter the keyword lp and the slot number to view information on the line-card processor in that slot. Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300. Defaults No default behavior or values Command Modes EXEC Privilege Command History Example Version 7.5.1.0 Introduced Figure 65-6. show console lp 0 command Example FTOS#show console lp 0 MINI FIFO CONTROL = 0x0a MINI FIFO RPM POINTER = 0x000 MINI FIFO CPU POINTER = 0xb0b Default case. type = 5 frrpaProcessIfmNotif(): Default case. type = 69 frrpaProcessIfmNotif(): Default case. type = 69 frrpaProcessIfmNotif(): Default case. type = 70 frrpaProcessIfmNotif(): Default case. type = 5 frrpaProcessIfmNotif(): Default case. type = 5 frrpaProcessIfmNotif(): Default case. type = 5 frrpaProcessIfmNotif(): Default case. type = 5 frrpaProcessIfmNotif(): Default case. type = 5 frrpaProcessIfmNotif(): Default case. type = 11 frrpaProcessIfmNotif(): Default case. type = 5 frrpaProcessIfmNotif(): Default case. type = 5 frrpaProcessIfmNotif(): Default case. type = 11 FTOS# 1546 | E-Series Debugging and Diagnostics