Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1496

www.dell.com | support.dell.com Parameters linecard rpm number Enter the keyword linecard to clear counters on a line card. Enter the keyword rpm to clear counters on an RPM. Enter a number after the following keywords: • After the keyword rpm: Range: 0-1 • After the keyword linecard: Range: 0-7 for the C300 Defaults None. Command Mode EXEC EXEC Privilege Command History Version7.5.1.0 Introduction Usage Information Warning: Commands in this chapter with this Warning symbol should be used only when you are working directly with Dell Force10 TAC (Technical Assistance Center) while troubleshooting a problem. To contact Dell Force10 TAC for assistance: E-mail Direct Support: [email protected] Web: www.force10networks.com/support/ Telephone support: US and Canada customers: 866-965-5800 International customers: 408-965-5800 clear hardware rpm mac counters Clear receive and transmit Ethernet statistics for all ports on the party-bus switch of the specified RPM. Syntax clear hardware rpm number mac counters Parameters number Enter the RPM slot number. Range: 0-1 Defaults None. Command Mode EXEC EXEC Privilege Command History Version 7.5.10 Introduction Usage Information Warning: Use this command only when you are working directly with a technical support representative to troubleshoot a problem. Do not use this command unless a technical support representative instructs you to do so. 1496 | C-Series Diagnostics and Debugging