Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 659

Figure 24-7. show arp cpu cp Command Example FTOS#sho arp cpu cp Protocol Address Age(min) Hardware Address Interface VLAN CPU Internet 10.1.2.206 0 00:a0:80:00:15:b8 Ma 0/0 - CP Internet 182.16.1.20 0 00:30:19:24:2d:70 Gi 8/0 - CP Internet 100.10.10.10 0 00:30:19:4f:d3:80 Gi 8/12 - CP Internet 10.1.2.209 12 00:a0:80:00:12:6c Ma 0/0 - CP FTOS# Table 24-4. show arp Command Example Fields Row Heading Protocol Address Age(min) Hardware Address Interface VLAN CPU Description Displays the protocol type. Displays the IP address of the ARP entry. Displays the age in minutes of the ARP entry. Displays the MAC address associated with the ARP entry. Displays the first two letters of the interfaces type and the slot/port associated with the ARP entry. Displays the VLAN ID, if any, associated with the ARP entry. Lists which CPU the entries are stored on. Figure 24-8. show arp summary Command Example FTOS# show arp summary Total Entries Static Entries Dynamic Entries CPU 83 0 83 CP FTOS Table 24-5. show arp summary Command Example Fields Row Heading Total Entries Static Entries Dynamic Entries CPU Description Lists the total number of ARP entries in the ARP table. Lists the total number of configured or static ARP entries. Lists the total number of learned or dynamic ARP entries. Lists which CPU the entries are stored on. Related Commands ip local-proxy-arp switchport mode private-vlan Enable/disable Layer 3 communication in secondary VLANs. Set the PVLAN mode of the selected port. show arp retries c e s Display the configured number of ARP retries. IPv4 Routing | 659