Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 846
multi-topology
View all Dell Force10 S25N-S50N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 846 highlights
www.dell.com | support.dell.com wide level-1 level-2 Allows you to configure the E-Series to generate and accept only new-style TLVs. Metric range: 0 to 16777215 Enables the metric style on Level 1. Enables the metric style on Level 2. Defaults narrow; if no Level is specified, Level-1 and Level-2 are configured. Command Modes ROUTER ISIS Usage Information If you enter the metric-style wide command, the FTOS generates and accepts only new-style TLVs. The router uses less memory and other resources rather than generating both old-style and new-style TLVs. The new-style TLVs have wider metric fields than old-style TLVs. Related Commands isis metric Use this command to configure a metric for an interface. multi-topology e Enables Multi-Topology IS-IS. It also allows enabling/disabling of old and new style TLVs for IP prefix information in the LSPs. Syntax multi-topology [transition] To return to a single topology configuration, enter no multi-topology [transition]. Parameters transition Defaults Disabled Command Mode CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 Command History Version 7.8.1.0 Introduced net e Use this mandatory command to configure an IS-IS network entity title (NET) for a routing process. If a NET is not configured, the IS-IS process will not start. Syntax net network-entity-title To remove a net, enter no net network-entity-title. Parameters network-entity-title Specify the area address and system ID for an IS-IS routing process. The first 1 to 13 bytes identify the area address. The next 6 bytes identify the system ID. The last 1 byte is the selector byte, always identified as zero zero (00). This argument can be applied to an address or a name. 846 | Intermediate System to Intermediate System (IS-IS)