Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1161

FTOS# show vlan private-vlan community Primary Secondary Type Active Ports 10 primary Yes Gi 2/1,3 101 community Yes Gi 2/7-10 20 primary Yes Po 10, 12-13 Gi 3/1 201 community No 202 community Yes Gi 3/11-12 FTOS# show vlan private-vlan interface Gi 2/1 Primary Secondary Type Active Ports 10 primary Yes Gi 2/1 If the VLAN ID is that of a primary VLAN, then the entire private VLAN output will be displayed, as shown in Figure 45-3. If the VLAN ID is a secondary VLAN, only its primary VLAN and its particular secondary VLAN properties will be displayed, as shown in Figure 45-4. Figure 45-3. Output of show vlan private-vlan (primary) FTOS# show vlan private-vlan 10 Primary Secondary Type Active Ports 10 primary Yes Gi 2/1,3 1020 isolated Yes Gi 0/4 101 community Yes Gi 2/7-10 Figure 45-4. Output of show vlan private-vlan (secondary) FTOS#show vlan private-vlan 102 Primary Secondary Type Active Ports 10 Primary Yes Po 1 Gi 0/2 102 Isolated Yes Gi 0/4 The table, below, defines the fields in the output, above. Table 45-2. show interfaces description Command Example Fields Field Primary Secondary Type Active Ports Description Displays the VLAN ID of the designated or associated primary VLAN(s) Displays the VLAN ID of the designated or associated secondary VLAN(s Displays the type of VLAN in which the listed interfaces reside States whether the interface is operationally up or down Displays the interface IDs in the listed VLAN. Related Commands private-vlan mode show interfaces private-vlan Set the mode of the selected VLAN to either community or isolated. Display type and status of PVLAN interfaces. Private VLAN (PVLAN) | 1161