Dell Force10 S25N-S50N FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series - Page 1331

byte log Defaults Not configured. Command Modes TRACE LIST Command History Version 7.4.1.0 Related Commands deny permit (OPTIONAL) Enter the keyword byte to count only bytes processed by the filter. (OPTIONAL) Enter the keyword log to have the information kept in a Trace-list log file. Deprecated established keyword-not supported on TeraScale line cards. Configure a filter to drop packets. Configure a filter to forward packets. show config e View the current IP trace list configuration. Syntax show config Command Modes TRACE LIST Example Figure 51-16. show config Command Example in TRACE LIST Mode FTOS(config-trace-acl)#show config ! ip trace-list suzanne seq 5 deny tcp any any FTOS(config-trace-acl)# show ip accounting trace-lists e View the trace lists created on the switch and the sequence of filters. Syntax show ip accounting trace-lists [trace-list-name [linecard number]] Parameters trace-list-name linecard number (OPTIONAL) Enter the name of the trace list to be displayed. (OPTIONAL) Enter the keyword linecard followed by the line card number to view the Trace list information on that line card. C-Series and S-Series Range: 0-7on the C300 E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600, and 0 to 5 on a E300. Command Modes EXEC EXEC Privilege Command History Version 7.6.1.0 Version 7.5.1.0 Support added for S-Series Support added for C-Series Security | 1331