Brother International WP230B Owners Manual - English - Page 118
Selecting, Pitch, Space
View all Brother International WP230B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
3. To set a margin at the carriage position, press CODE + 4 (L MAR) or CODE + 5 (R MAR). NOTES: • Margins cannot be set while in display mode (centering, right margin flush, decimal tab) or in L/L mode. • There must be at least 2 inches between margins. • The margin settings are reset to their default values when you turn the power off, then on. Selecting the Pitch CODE PITCH Pressing CODE + 1 (PITCH) changes the pitch through the following cycle: PITCH: 10 -+ 12 -+ 15 -4 10 Pitch 10 (PICA) 12 (ELITE) 15 (MICRON) Number of Characters per inch 10 characters per inch 12 characters per inch 15 characters per inch NOTES: • The pitch cannot be changed while in display mode (centering, right margin flush, decimal tab mode). • The pitch can be changed in Lk mode only before entering text on the screen. • The pitch setting is reset to its default value when you turn the power off, then on. Selecting the Line Space CODE a2• Pressing CODE + 2 (LINE) changes the line space through the following cycle: L.SP: 1.0 -0 1.5 -4 2.0 -+ 1.0 Line Spacing 1.0 1.5 2.0 Number of Lines per inch 6 lines per inch 4 lines per inch 3 lines per inch 106 Typewriting