Brother International WP230B Owners Manual - English - Page 312

Error Messages Please consult the following table when an error message appears. Message Cause Remedy Memory full. You attempted an operation that would require more memory than the total limit of 32 kilobytes. Delete some parts of the text using BACKSPACE, CORRECT, WORD OUT, CODE + LINE OUT, or the block delete function. You may also try to copy a smaller block. Save the file and start a new file. Unidentified disk error. Insert another and press RETLTRN. Defective diskette. Consult your local Brother Service Center. You attempted to copy an uninitialized source diskette. Initialize the diskette. (This will erase any files previously stored on the diskette.) Irmr!rt disk and press RETURN. The diskette is not inserted when you start a read operation, or the diskette is removed during read or write operation (a message was telling you to wait). Insert the diskette and press RETURN. Avoid removing or inserting a diskette while prompted to wait. Disk is write protected. Relese the protection and pri .s RETURN to retry. You are using a write-protected diskette. Use another diskette or disengage the write protection. Check printer. Malfunction of the Consult your local Brother Serprinter mechanism. vice Center. 300 Appendix