HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 103
display router id
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Parameters process-id: Specifies an OSPF process by its ID in the range of 1 to 65535. Usage guidelines If no OSPF process is specified, this command displays the OSPF virtual link information for all OSPF processes. Examples # Display OSPF virtual link information. display ospf vlink OSPF Process 1 with Router ID 3.3.3.3 Virtual Links Virtual-link Neighbor-ID -> 2.2.2.2, Neighbor-State: Full Interface: 10.1.2.1 (Vlan-interface11) Cost: 1562 State: P-2-P Type: Virtual Transit Area: 0.0.0.1 Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1 Table 30 Command output Field Virtual-link Neighbor-ID Neighbor-State Interface Cost State Type Transit Area Timers Description ID of the neighbor on the virtual link. Neighbor state: Down, Init, 2-Way, ExStart, Exchange, Loading, Full. IP address and name of the local interface on the virtual link. Interface route cost. Interface state. Virtual link. Transit area ID. Values of timers: hello, dead, retransmit, and interface transmission delay. display router id Use display router id to display the global router ID. Syntax display router id Views Any view Predefined user roles network-admin network-operator Examples # Display the global router ID. 92