HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 428
apply community
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 428 highlights
Use undo apply comm-list to restore the default. Syntax apply comm-list { comm-list-number | comm-list-name } delete undo apply comm-list Default No COMMUNITY attributes are deleted from BGP routes. Views Routing policy node view Predefined user roles network-admin Parameters comm-list-number: Specifies a basic community list by its number in the range of 1 to 99 or an advanced community list by its number in the range of 100 to 199. comm-list-name: Specifies a community list by its name, a case-sensitive string of 1 to 63 characters that cannot comprise only numbers. Examples # Configure node 10 in permit mode for routing policy policy1 to remove the COMMUNITY attributes specified in community list 1 from BGP routes. system-view [Sysname] route-policy policy1 permit node 10 [Sysname-route-policy-policy1-10] apply comm-list 1 delete Related commands ip community-list apply community Use apply community to set a specified COMMUNITY attribute for BGP routes. Use undo apply community to remove the configuration. Syntax apply community { none | additive | { community-number& | aa:nn& | internet | no-advertise | no-export | no-export-subconfed } * [ additive ] } undo apply community [ none | additive | { community-number& | aa:nn& | internet | no-advertise | no-export | no-export-subconfed } * [ additive ] ] Default No COMMUNITY attribute is set for BGP routes. Views Routing policy node view Predefined user roles network-admin 417