HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 47
display rip route
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Field Description Default route Indicates whether to send a default route to RIP neighbors: • Only-Advertises only a default route. • Originate-Advertises both a default route and other routes. • No-originate-Advertises only non-default routes. • Off-Advertises no default route. Default route cost Metric for a default route. Current number of packets /Maximum Number of RIP packets to be sent/maximum number of RIP packets number of packets that can be sent within a certain interval. display rip route Use display rip route to display routing information for a RIP process. Syntax display rip process-id route [ ip-address { mask | mask-length } | peer ip-address | statistics ] Views Any view Predefined user roles network-admin network-operator Parameters process-id: Specifies a RIP process by its ID in the range of 1 to 65535. ip-address { mask | mask-length }: Displays route information for the specified IP address. peer ip-address: Displays route information learned from the specified neighbor. statistics: Displays route statistics, including the total number of routes and number of routes from each neighbor. Examples # Display all routing information for RIP process 1. display rip 1 route Route Flags: R - RIP A - Aging, S - Suppressed, G - Garbage-collect Peer 1.1.1.2 on Vlan-interface12 Destination/Mask Nexthop Cost Tag Flags Sec 2.0.0.0/8 1.1.1.2 1 0 RA 14 36