HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 232
Table 52, Command output, Active Hold Time and keepalive interval Keepalive Time.
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
Peer Preferred Value: 0 BFD: Enabled Routing policy configured: No routing policy is configured Table 52 Command output Field Peer Local Type remote router ID BGP current state Up for BGP current event BGP last state Port Configured Received Negotiated Peer optional capabilities Peer support BGP route AS4 capability Address family IPv4 Unicast Received Sent Maximum allowed prefix number Threshold Minimum time between advertisements Optional capabilities Peer Preferred Value BFD Description IP address of the peer. Local router ID. BGP connection type between the local router and the peer: • IBGP link-IBGP connection. • EBGP link-EBGP connection. Router ID of the peer. Current state of the BGP session between the local router and the peer. Lasting time of the BGP session. Current event of the BGP session between the local router and the peer. Previous state of the BGP session. TCP port numbers of the local router and its peer. Timers configured on the local router in seconds, including the holdtime (Active Hold Time) and keepalive interval (Keepalive Time). Received timer (configured on the peer) in seconds, including the holdtime (Active Hold Time). Negotiated timers in seconds, including the holdtime (Active Hold Time) and keepalive interval (Keepalive Time). Optional capabilities supported by the peer. The peer supports 4-byte AS number. IPv4 unicast address family capability: Routes of the address family can be advertised and received. Total numbers of received messages and updates. Total numbers of sent messages and updates. Maximum number of routes allowed to learn from the peer. Percentage of received routes from the peer to maximum routes allowed to learn from the peer. If the percentage is reached, the system generates alarm messages. Minimum route advertisement interval in seconds. Optional capabilities supported by the local end. Preferred value specified for the routes from the peer. Indicates whether BFD is enabled to detect the link to the BGP peer. 221