HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 311
command, if con d for the referenced routing policy, does not take effect
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 311 highlights
peer { group-name | ip-address } route-policy route-policy-name { export | import } undo peer { group-name | ip-address } route-policy route-policy-name { export | import } In BGP IPv6 unicast instance view: peer { group-name | ipv6-address } route-policy route-policy-name { export | import } undo peer { group-name | ipv6-address } route-policy route-policy-name { export | import } In BGP-VPN IPv6 unicast instance view: peer { group-name | ipv6-address } route-policy route-policy-name { export | import } undo peer { group-name | ipv6-address } route-policy route-policy-name { export | import } Default No routing policy is applied to routes from/to the peer or peer group. Views BGP IPv4 unicast instance view, BGP-VPN IPv4 unicast instance view, BGP IPv6 unicast instance view, BGP-VPN IPv6 unicast instance view Predefined user roles network-admin Parameters group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer group must have been created. ip-address: Specifies a peer by its IP address. The peer must have been created. ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created. route-policy-name: Specifies a routing policy by its name, a case-sensitive string of 1 to 63 characters. export: Applies the routing policy to routes outgoing to the peer or peer group. import: Applies the routing policy to routes incoming from the peer or peer group. Usage guidelines The specified routing policy must have been configured with the route-policy command in system view. Otherwise, all routes can pass the routing policy. The if-match interface command, if configured for the referenced routing policy, does not take effect for routes. Examples # In BGP IPv4 unicast instance view, apply routing policy test-policy to routes outgoing to the peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family unicast [Sysname-bgp-ipv4] peer test route-policy test-policy export # In BGP-VPN IPv6 unicast instance view, apply the routing policy test-policy to routes outgoing to the peer group test. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 300