HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 116
lsdb-overflow-interval, lsa-generation-interval, Related commands, Syntax, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
system-view [Sysname] ospf 100 [Sysname-ospf-100] lsa-arrival-interval 200 Related commands lsa-generation-interval lsdb-overflow-interval Use lsdb-overflow-interval to configure the interval that OSPF exits overflow state. Use undo lsdb-overflow-interval to restore the default. Syntax lsdb-overflow-interval interval undo lsdb-overflow-interval Default The OSPF exit overflow interval is 300 seconds. Views OSPF view Predefined user roles network-admin Parameters interval: Specifies the interval that OSPF exits overflow state, in the range of 0 to 2147483647 seconds. Usage guidelines When the number of LSAs in the LSDB exceeds the upper limit, the LSDB is in an overflow state. In this state, OSPF does not receive any external LSAs and deletes the external LSAs generated by itself to save system resources. You can configure the interval that OSPF exits overflow state. An interval of 0 indicates that the timer is not started and OSPF does not exit overflow state. Examples # Configure the OSPF exit overflow interval as 10 seconds. system-view [Sysname] ospf 100 [Sysname-ospf-100] lsdb-overflow-interval 10 lsa-generation-interval Use lsa-generation-interval to configure the OSPF LSA generation interval. Use undo lsa-generation-interval to restore the default. Syntax lsa-generation-interval maximum-interval [ minimum-interval [ incremental-interval ] ] undo lsa-generation-interval 105