HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 244
mask of a route. If the result matches the network address of the route, the command displays
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
network-operator Parameters vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31 characters. If no VPN is specified, the command displays the BGP IPv4 unicast routing information for the public network. network-address: Specifies a destination network address. mask: Specifies a network mask, in dotted decimal notation. mask-length: Specifies a mask length in the range of 0 to 32. longest-match: Displays the routing entries selected through the following steps: 1. AND the specified network address with the specified mask. 2. Display the route with the longest mask among the matching routes that have a mask shorter than or equal to the specified mask. Usage guidelines • If the network-address, mask, and mask-length arguments are not specified, the command displays brief information about all BGP IPv4 unicast routes. • If only the network-address argument is specified, the system ANDs the network address with the mask of a route. If the result matches the network address of the route, the command displays detailed information about the route. • If the network-address mask or network-address mask-length argument is specified and the longest-match keyword is not specified, the command displays detailed information about the BGP IPv4 unicast route that matches both the specified destination network address and the mask (or mask length). The command with the unicast keyword has the same effect as that without the unicast keyword. Examples # Display brief information about all BGP IPv4 unicast routes for the public network. display bgp routing-table ipv4 Total number of routes: 4 BGP local router ID is 192.168.100.1 Status codes: * - valid, > - best, d - damped, h - history, s - suppressed, S - Stale, i - internal, e - external Origin: i - IGP, e - EGP, ? - incomplete Network NextHop MED LocPrf PrefVal Path/Ogn > 10.2.1.0/24 e > 192.168.1.0 * e 10.2.1.1 0 10.2.1.2 0 192.168.1.135 0 10.2.1.2 0 0 i 0 200i 0 i 0 200i 233