HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 68
timers, Default, Views, Predefined user roles, Usage guidelines, Examples, Related commands, Syntax
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
undo summary Default Automatic RIPv2 route summarization is enabled. Views RIP view Predefined user roles network-admin Usage guidelines Automatic RIPv2 route summarization can reduce the routing table size to enhance the scalability and efficiency for large networks. Examples # Disable automatic RIPv2 route summarization. system-view [Sysname] rip [Sysname-rip-1] undo summary Related commands • rip summary-address • rip version timers Use timers to configure RIP timers. Use undo timers to restore the default. Syntax timers { garbage-collect garbage-collect-value | suppress suppress-value | timeout timeout-value | update update-value } * undo timers { garbage-collect | suppress | timeout | update } * Default The garbage-collect timer is 120 seconds, the suppress timer is 120 seconds, the timeout timer is 180 seconds, and the update timer is 30 seconds. Views RIP view Predefined user roles network-admin Parameters garbage-collect-value: Specifies the garbage-collect timer in the range of 1 to 3600 seconds. suppress-value: Specifies the suppress timer in the range of 0 to 3600 seconds. timeout-value: Specifies the timeout timer in the range of 1 to 3600 seconds. The timeout timer must be at least three times the update timer. 57