HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 184
isis dis-name, isis dis-priority
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Usage guidelines If neither level-1 nor level-2 is included, the cost applies to both level-1 and level-2. Examples # Configure the Level-2 IS-IS cost as 5 for VLAN-interface 10. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] isis cost 5 level-2 isis dis-name Use isis dis-name to configure a name for a DIS to represent the pseudo node on a broadcast network. Use undo isis dis-name to restore the default. Syntax isis dis-name symbolic-name undo isis dis-name Default No name is configured for the DIS. Views Interface view Predefined user roles network-admin Parameters symbolic-name: Specifies a DIS name, a string of 1 to 64 characters. Usage guidelines This command takes effect only on routers that have dynamic system ID to host name mapping enabled. Examples # Configure the DIS name as LOCALAREA. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] isis dis-name LOCALAREA isis dis-priority Use isis dis-priority to specify a DIS priority at a specified level for an interface. Use undo isis dis-priority to remove the configuration. Syntax isis dis-priority value [ level-1 | level-2 ] undo isis dis-priority [ level-1 | level-2 ] 173