HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 117
lsdb-overflow-limit, Default, Views, Predefined user roles, Parameters, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Default The maximum interval is 5 seconds, the minimum interval is 0 milliseconds, and the incremental interval is 0 milliseconds. Views OSPF view Predefined user roles network-admin Parameters maximum-interval: Specifies the maximum LSA generation interval in the range of 1 to 60 seconds. minimum-interval: Specifies the minimum LSA generation interval in the range of 10 to 60000 milliseconds. 0 indicates that the minimum interval can be any value. incremental-interval: Specifies the LSA generation incremental interval in the range of 10 to 60000 milliseconds. Usage guidelines When network changes are not frequent, LSAs are generated at the minimum-interval. If network changes become frequent, the LSA generation interval is incremented by incremental-interval × 2n-2 (n is the number of generation times) each time a LSA generation occurs until the maximum-interval is reached. The minimum interval and the incremental interval cannot be greater than the maximum interval. Examples # Configure the maximum LSA generation interval as 2 seconds, minimum interval as 100 milliseconds and incremental interval as 100 milliseconds. system-view [Sysname] ospf 100 [Sysname-ospf-100] lsa-generation-interval 2 100 100 Related commands lsa-arrival-interval lsdb-overflow-limit Use lsdb-overflow-limit to specify the upper limit of external LSAs in the LSDB. Use undo lsdb-overflow-limit to restore the default. Syntax lsdb-overflow-limit number undo lsdb-overflow-limit Default The number of external LSAs is not limited. Views OSPF view 106