HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 276
peer advertise-community
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
You can use the preference command to modify the preferences for external and local BGP routes. Examples # In BGP IPv4 unicast instance view, increase the preference of EBGP route 10.0.0.0/16. system-view [Sysname] bgp 100 [Sysname-bgp] ipv4-family unicast [Sysname-bgp-ipv4] network 10.0.0.0 255.255.0.0 short-cut # In BGP-VPN IPv6 unicast instance view, increase the preference of EBGP route 10::/16. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] ipv6-family unicast [Sysname-bgp-ipv6-vpn1] network 10:: 16 short-cut Related commands preference peer advertise-community Use peer advertise-community to advertise the COMMUNITY attribute to a peer or peer group. Use undo peer advertise-community to disable the COMMUNITY attribute advertisement to a peer or peer group. Syntax In BGP IPv4 unicast instance view/BGP-VPN IPv4 unicast instance view: peer { group-name | ip-address } advertise-community undo peer { group-name } advertise-community In BGP IPv6 unicast instance view: peer { group-name | ipv6-address } advertise-community undo peer { group-name | ipv6-address } advertise-community Default No COMMUNITY attribute is advertised to any peer or peer group. Views BGP IPv4 unicast instance view, BGP-VPN IPv4 unicast instance view, BGP IPv6 unicast instance view Predefined user roles network-admin Parameters group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer group must have been created. ip-address: Specifies a peer by its IP address. The peer must have been created. ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created. 265