HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 374
display ospfv3 request-queue, Table 85, Command output
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 374 highlights
Field DR BDR MTU Options Dead timer due in 33 sec Neighbor is up for 00:24:19 Neighbor state change count Database Summary List Link State Request List Link State Retransmission List Description DR on the interface's network segment. BDR on the interface's network segment. Interface MTU. Options. This dead timer will expire in 33 seconds. The neighbor has been up for 00:24:19. Count of neighbor state changes. Number of LSAs sent in DD packet. Number of LSAs in the link state request list. Number of LSAs in the link state retransmission list. # Display OSPFv3 neighbor statistics. display ospfv3 peer statistics OSPFv3 Process 1 with Router ID 1.1.1.1 Area ID Down Init 2-Way ExStart Exchange Loading Full Total 0.0.0.0 0 0 0 0 0 0 2 2 Total 0 0 0 0 0 0 2 2 Table 85 Command output Field Area ID Down Init 2-Way ExStart Exchange Loading Full Total Description Area ID. In this state, neighbor initial state, the router has not received any information from a neighboring router for a period of time. In this state, the device received a Hello packet from the neighbor but the packet contains no Router ID of the neighbor. Mutual communication is not setup. Mutual communication between the router and its neighbor is available. DR/BDR election is finished under this state (or higher). In this state, the router decides on the initial DD sequence number and active/standby relationship of the two parties. In this state, the router exchanges DD packets with the neighbor. In this state, the router sends LSRs to request the neighbor for needed LSAs. LSDB synchronization has been accomplished between neighbors. Total number of neighbors under the same state. display ospfv3 request-queue Use display ospfv3 request-queue to display OSPFv3 request list information. 363