HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 120
opaque-capability enable, Views, Predefined user roles, Parameters, Usage guidelines, Examples
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Views OSPF area view Predefined user roles network-admin Parameters default-route-advertise: Used on an NSSA ABR or an ASBR only. If it is configured on an NSSA ABR, the ABR generates a default route in a Type-7 LSA into the NSSA area regardless of whether a default route is available in the routing table. If it is configured on an ASBR, the ASBR generates a default route in a Type-7 LSA only when the default route is available in the routing table. no-import-route: Used on an NSSA ABR to control the import-route command to not redistribute routes into the NSSA area. no-summary: Used only on an NSSA ABR to advertise a default route in a Type-3 summary LSA into the NSSA area and to not advertise other summary LSAs into the area. Such an area is a totally NSSA area. translate-always: Specifies the NSSA ABR as a translator to translate Type-7 LSAs to Type-5 LSAs. translator-stability-interval value: Specifies the stability interval of the translator, during which the translator can maintain its translating capability after a device with a higher priority becomes the new translator. The value argument is the stability interval in the range of 0 to 900 seconds and defaults to 0 (which means the translator does not maintain its translating capability when a new translator arises). Usage guidelines All routers attached to an NSSA area must be configured with the nssa command in area view. Examples # Configure Area 1 as an NSSA area. system-view [Sysname] ospf 100 [Sysname-ospf-100] area 1 [Sysname-ospf-100-area-0.0.0.1] nssa Related commands default-cost opaque-capability enable Use opaque-capability enable to enable opaque LSA advertisement and reception. Use undo opaque-capability to disable opaque LSA advertisement and reception. Syntax opaque-capability enable undo opaque-capability Default The feature is enabled. Views OSPF view 109