HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 74
bandwidth-reference (OSPF view
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Parameters md5: Specifies the MD5 authentication mode. simple: Specifies the simple authentication mode. Usage guidelines Routers that reside in the same area must have the same authentication mode: no authentication, simple, or MD5. Examples # Configure OSPF Area 0 to use the MD5 authentication mode. system-view [Sysname] ospf 100 [Sysname-ospf-100] area 0 [Sysname-ospf-100-area-0.0.0.0] authentication-mode md5 Related commands ospf authentication-mode bandwidth-reference (OSPF view) Use bandwidth-reference to specify a reference bandwidth value for link cost calculation. Use undo bandwidth-reference to restore the default value. Syntax bandwidth-reference value undo bandwidth-reference Default The default value is 100 Mbps. Views OSPF view Predefined user roles network-admin Parameters value: Specifies the bandwidth reference value for link cost calculation, in the range of 1 to 4294967 Mbps. Usage guidelines If no cost values are configured for links, OSPF calculates their cost values by using the formula: Cost = Reference bandwidth value/Link bandwidth. If the calculated cost is greater than 65535, the value of 65535 is used. Examples # Specify the reference bandwidth value as 1000 Mbps. system-view [Sysname] ospf 100 [Sysname-ospf-100] bandwidth-reference 1000 63