HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 91

Field State Cost Pri DR BDR Description Interface state: • DOWN-No protocol traffic can be sent or received on the interface. • Waiting-The interface starts sending and receiving Hello packets and the router is trying to determine the identity of the (Backup) designated router for the network. • p-2-p-The interface will send Hello packets at the interval of HelloInterval, and try to establish an adjacency with the neighbor. • DR-The router is the designated router on the network. • BDR-The router is the backup designated router on the network. • DROther-The router is a DROther router on the attached network. Interface cost. Router priority. DR on the interface's network segment. BDR on the interface's network segment. # Display detailed information about VLAN-interface 11. display ospf interface Vlan-interface 11 OSPF Process 1 with Router ID 192.168.1.1 Interfaces Interface: 172.16.0.1 (Vlan-interface11) Cost: 1 State: DR Type: Broadcast MTU: 1500 Priority: 1 Designated Router: 172.16.0.1 Backup Designated Router: 0.0.0.0 Timers: Hello 10, Dead 40, Poll 40, Retransmit 5, Transmit Delay 1 FRR backup: enable Table 20 Command output Field Interface Timers FRR backup Description Information about the interface, such as the IP address. OSPF timers: hello, dead, poll, retransmit, and transmit delay. Indicates whether LFA calculation is enabled on an interface. display ospf lsdb Use display ospf lsdb to display OSPF LSDB information. 80