HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 284
peer capability-advertise conventional, ip-address, High Availability Command Reference
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 284 highlights
Views BGP view, BGP-VPN instance view Predefined user roles network-admin Parameters ip-address: Specifies a peer by its IP address. The peer must have been created. ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created. Usage guidelines BFD helps speed up BGP routing convergence upon link failures. However, if you have enabled GR, use BFD with caution because BFD might detect a failure before the system performs GR, resulting in GR failure. If you have enabled both BFD and GR for BGP, do not disable BFD during a GR process to avoid GR failure. Examples # In BGP view, enable BFD for the link to BGP peer 1.1.1.1. system-view [Sysname] bgp 100 [Sysname-bgp] peer 1.1.1.1 bfd # In BGP view, enable BFD for the link to BGP peer 1::1. system-view [Sysname] bgp 100 [Sysname-bgp] peer 1::1 bfd # In BGP-VPN instance view, enable BFD for the link to BGP peer 2.2.2.2. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] peer 2.2.2.2 bfd # In BGP-VPN instance view, enable BFD for the link to BGP peer 2::2. system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] peer 2::2 bfd Related commands • display bgp peer ipv4 unicast • display bgp peer ipv6 unicast • display bfd session (High Availability Command Reference) peer capability-advertise conventional Use peer capability-advertise conventional to disable BGP multi-protocol extension and route refresh for a peer or peer group. Use undo peer capability-advertise conventional to enable BGP multi-protocol extension and route refresh for a peer or peer group. 273