HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 292
peer enable, Parameters, Usage guidelines, Examples, Syntax, Default
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
Parameters group-name: Specifies a peer group by its name, a case-sensitive string of 1 to 47 characters. The peer group must have been created. ip-address: Specifies a peer by its IP address. The peer must have been created. ipv6-address: Specifies a peer by its IPv6 address. The peer must have been created. hop-count: Specifies the maximum number of hop counts, in the range of 1 to 255. The default is 64. Usage guidelines EBGP peers must be directly connected. If not, use the peer ebgp-max-hop command to establish an EBGP session over multiple hops between two peers. If direct EBGP peers use loopback interfaces to establish a BGP session, you do not need to configure the peer ebgp-max-hop command. Examples # In BGP view, enable BGP to establish EBGP sessions to an indirectly-connected EBGP peer group test, and specify the maximum hop count as 64 (default). system-view [Sysname] bgp 100 [Sysname-bgp] peer test ebgp-max-hop # In BGP-VPN instance view, enable BGP to establish EBGP sessions to an indirectly-connected EBGP peer group test, and specify the maximum hop count as 64 (default). system-view [Sysname] bgp 100 [Sysname-bgp] ip vpn-instance vpn1 [Sysname-bgp-vpn1] peer test ebgp-max-hop peer enable Use peer enable to enable BGP to exchange routing information for an address family with a peer or peer group. Use undo peer enable to disable BGP from exchanging routing information for an address family with a peer or peer group. Syntax In BGP IPv4 unicast instance view/BGP-VPN IPv4 unicast instance view : peer { group-name | ip-address } enable undo peer { group-name | ip-address } enable In BGP IPv6 unicast instance view: peer { group-name | ipv6-address } enable undo peer { group-name | ipv6-address } enable In BGP-VPN IPv6 unicast instance view: peer { group-name | ipv6-address } enable undo peer { group-name | ipv6-address } enable Default BGP cannot exchange routing information with a peer or peer group. 281