HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 82

Timers: Hello 10 , Dead 40 , Poll 40 , Retransmit 5 , Transmit Delay 1 FRR backup: enable Table 15 Command output Field Description OSPF Process 1 with Router ID 192.168.1.2 OSPF process ID and OSPF router ID. RouterID Router ID. Router Type Router type: • ABR. • ASBR. • NSSA. • Null. Route Tag Tag of redistributed routes. Multi-VPN-Instance is not enabled The OSPF process does not support multi-VPN-instance. Opaque capable The opaque LSA advertisement and reception is enabled. ISPF is enabled OSPF ISPF is enabled SPF-schedule-interval Interval for SPF calculations. LSA generation interval LSA generation interval. LSA arrival interval LSA arrival interval. Transmit pacing LSU packet transmit rate of the interface: • Interval-LSU transmit interval of the interface. • Count-Maximum number of LSU packets sent each time. Default ASE Parameter Default ASE Parameters: metric, tag, route type. Route Preference Internal route preference. ASE Route Preference External route preference. SPF Computation count SPF computation count of the OSPF process. RFC1583 Compatible Compatible with RFC 1583. Area Count Area number of the current process. Nssa Area Count NSSA area number of the current process. SNMP trap rate limit interval SNMP trap sending interval. Count Number of sent SNMP traps. 7/5 translator state State of the translator that translates Type-7 LSAs to Type-5 LSAs. The value can be one of the following: • Enabled-The translator is specified through commands. • Elected-The translator is designated through election. • Disabled-The device is not a translator that translates Type-7 LSAs to Type-5 LSAs. 7/5 translate stability timer interval Stability interval for Type-7 LSA-to-Type-5 LSA translation. ExChange/Loading Neighbors Neighbors in ExChange/Loading state. Area Area ID in the IP address format. 71