HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 186
isis peer-ip-ignore, isis silent
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Examples # Enable IS-IS process 1 globally and enable it on VLAN-interface 10. system-view [Sysname] isis 1 [Sysname-isis-1] network-entity 10.0001.1010.1020.1030.00 [Sysname-isis-1] quit [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] isis enable 1 Related commands • isis • network-entity isis peer-ip-ignore Use isis peer-ip-ignore to configure a PPP interface to not check the peer's IP address in received hello packets. Use undo isis peer-ip-ignore to restore the default. Syntax isis peer-ip-ignore undo isis peer-ip-ignore Default The PPP interface checks the peer's IP address upon receiving a hello packet. Views Interface view Predefined user roles network-admin Usage guidelines An IS-IS PPP interface requires the sender of a hello packet be on the same network segment as it. Otherwise, it discards the hello packet. The isis peer-ip-ignore command removes this restriction. Examples # Configure Serial 2/0 to not check the peer's IP address in received Hello packets. system-view [Sysname] interface serial 2/0 [Sysname-Serial2/0] isis peer-ip-ignore isis silent Use isis silent to disable the interface from sending and receiving IS-IS packets. Use undo isis silent to restore the default. Syntax isis silent 175