HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 125
ospf fast-reroute lfa-backup, ospf mib-binding, Default, Views, Predefined user roles, Parameters
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Default The router priority is 1. Views Interface view Predefined user roles network-admin Parameters priority: Specify the router priority for the interface, in the range of 0 to 255. Usage guidelines The greater the value, the higher the priority for DR/BDR election. If a device has a priority of 0, it will not be elected as a DR or BDR. Examples # Set the router priority on VLAN-interface 10 to 8. system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospf dr-priority 8 ospf fast-reroute lfa-backup Use ospf fast-reroute lfa-backup to enable LFA on the interface. Use undo ospf fast-reroute lfa-backup to disable LFA on the interface. Syntax ospf fast-reroute lfa-backup undo ospf fast-reroute lfa-backup Default LFA is enabled on the interface. Predefined user roles network-admin Usage guidelines If you enable LFA on an interface, it can be selected as a backup interface. After you disable LFA on the interface, it cannot be selected as a backup. Examples # Disable VLAN-interface 11 from calculating a backup next hop by using the LFA algorithm. system-view [Sysname] interface vlan-interface 11 [Sysname-Vlan-interface11] undo ospf fast-reroute lfa-backup ospf mib-binding Use ospf mib-binding to bind an OSPF process to MIB operation for responding to SNMP requests. 114