HP 6125XLG R2306-HP 6125XLG Blade Switch Layer 3 - IP Routing Command Referenc - Page 392
ospfv3 bfd enable, ospfv3 cost
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 392 highlights
system-view [Sysname] interface vlan-interface 10 [Sysname-Vlan-interface10] ospfv3 1 area 1 instance 1 ospfv3 bfd enable Use ospfv3 bfd enable to enable BFD on an OSPFv3 interface. Use undo ospfv3 bfd enable to disable BFD on an OSPFv3 interface. Syntax ospfv3 bfd enable [ instance instance-id ] undo ospfv3 bfd enable [ instance instance-id ] Default BFD for OSPFv3 is disabled. Views Interface view Predefined user roles network-admin Parameters instance-id: Specifies an instance by its ID in the range of 0 to 255. The default is 0. Usage guidelines BFD provides a mechanism to quickly detect the connectivity of links between OSPFv3 neighbors, improving the convergence speed of OSPFv3. OSPFv3 uses BFD to implement bidirectional control detection. Examples # Enable BFD on VLAN-interface 11 in instance 1. system-view [Sysname] interface vlan-interface 11 [Sysname-Vlan-interface11] ospfv3 bfd enable instance 1 ospfv3 cost Use ospfv3 cost to configure an OSPFv3 cost for an interface in an instance. Use undo ospfv3 cost to restore the default. Syntax ospfv3 cost value [ instance instance-id ] undo ospfv3 cost [ instance instance-id ] Default The cost is 1 for a VLAN interface, is 0 for a loopback interface, and is computed according to the interface bandwidth for other interfaces. 381